How to complete the rapid installation of rubber expansion joints?

Use the whole process, should avoid the use of deformation to regulate the installation condition of the pipeline, which will be directly related to the regular use of the equipment years, improve the obligation of the pipeline. Can be axial expansion in a certain area, but also from a certain angle to get rid of the deviation caused by the different axial connection of the pipeline, to facilitate the installation and removal of the gate valve pipeline. When the pipeline allows expansion type, it can be expanded and contracted at will.
 
The application method of rubber expansion joint is to put one end of the flange with the flange on the pipeline. The length should be slightly lower than the total length of the product, and the length can be marked in advance at the end of the pipe for easy grasp. Before installation, check whether the adjusting screws are loose and whether the rubber sealing ring is not extruded. Soapy water can be applied to the pipe in advance to reduce the divergence. After inserting into the pipe, should gradually circulate the system to tighten the adjusting foot screw, so as to facilitate the rubber sealing ring to bear the closest contact with the pipe. Applied to the tail of the pipeline, should be scientifically studied to configure the top town pier to the drive of the material in the pipeline. Rubber expansion joint is the new substance of pump, valve, pipeline and other facilities connected to the pipeline, according to the screw connection into one, with offset, installation and maintenance can be adjusted according to the installation specifications on the spot, work on the axial driving force back to the pipeline system software. This not only improves the efficiency, but also maintains the pump, gate valve and other pipeline machinery and equipment. In the assembly process, follow the interpretation, standard installation to ensure the tightness of the pipeline and adjust the actual effect.