304 flange rubber soft connection how to maintain

In order to ensure the strength and stiffness of 304 flange rubber soft connection, set up a variety of support (hanging) frame, such as movable bracket, fixed bracket, guide bracket and spring bracket, etc. 304 flange rubber soft connection is set up according to the diameter of the pipe, material, pipe wall thickness and load and other conditions. 304 flange rubber soft connection is used to control the thermal elongation of the pipe in sections, so that 304 flange rubber soft connection works evenly. Guided bracket makes the pipe only axial movement. 304 flange rubber soft connection will be installed with a separate ball valve or needle valve to control. 304 flange rubber soft connection bracket requires corrosion resistance and can be made of stainless steel or other suitable engineering plastics, etc. Every 1.5m or so, 304 flange rubber soft connection needs to have bracket. In addition, according to the diameter of the 304 flange rubber soft connection bending, set the appropriate bracket position. The applicable pipe diameter range is large.
Connection according to the nature of the medium, pressure and temperature selection of different flange and sealing gasket, the use of bolts to clamp the gasket to maintain a seal. 304 flange rubber soft connection threaded connection using the residue of the sealing filler has the risk of substitution into the medium, and the internal and external threads screwing, 304 flange rubber soft connection between the friction will produce metal dust particles, pollution of the medium.

 
In 304 flange rubber soft connection evenly hung on a certain amount of welding rod to improve the sealing effect and minimize metal dust. 304 flange rubber soft connection on the media outlet by a separate valve to control. At the section of the pipe that needs to be disassembled frequently and where the pipe is connected to the equipment, most flange connections are used. When the flow rate of the medium is known, the size of the pipe diameter depends on the allowable flow rate or allowable friction resistance (pressure drop). The pipe diameter is small when the flow rate is large, but the pressure drop value.