Large tie rod transverse corrugated compensator installation adjustment.

Large tie rod transverse corrugated compensator installation adjustment.
Compensate lateral displacement of the corrugated compensator products large tie rod transverse corrugated compensator, used to compensate the lateral displacement of the bending pipeline. How do you need to adjust the tie rod part after the installation is completed? Corrugated compensator manufacturer Huanxin manufacturing take you to understand how to adjust the big tie rod transverse corrugated compensator tie rod. The large tie rod transverse corrugated compensator consists of a middle receiver connecting the bellows at both ends plus a large tie rod and a small tie rod and flange. Through the bellows expansion and deformation can absorb the lateral displacement of the pipe. The four tie rods can withstand internal pressure, thrust and other external forces. Installed in the bend of the pipeline or the space pipeline connected with the equipment, it plays the role of compensation of axial displacement, lateral displacement, without generating internal pressure thrust on the pipeline system or other equipment.
Big tie transverse corrugated compensator installation flange connection will be flange bolt hole alignment plus gaskets tighten the bolt, pay attention to the direction of the inflow cylinder to maintain consistent with the media flow direction. The welding of the pipe connection should pay attention to the protection of the bellows part to avoid being scratched by the welding slag. Many users will ask whether the installation should be debugged. Corrugated compensator factory have been debugged before the direct installation and use. The four tie rods not only play a limiting role, but also to prevent additional blind force. So the large tie rod transverse corrugated compensator installation is completed in addition to play a role in transporting the tie rod can be removed other tie rod can not be removed. Tie rod can do fine adjustment with the inside of the tie rod nut can be loosened 2 ~ 3 buckles.
 
Different models of corrugated compensator installation method although roughly the same, but different manufacturers of corrugated compensator installation are required to pay attention to the place. Users can be installed according to the instructions provided by the corrugated compensator manufacturer.