Removable double flange loose sleeve transfer joint in the pump industry

Removable double flange loose sleeve transfer joint in the pump industry
Detachable double flange loose sleeve transfer joint or preheater leaks, leaks are more serious problems, detachable double flange loose sleeve transfer joint daily maintenance work to do a good job of leak detection, you can use ammonia to check the leak point, there is a pungent smell, and there is no frost at the leak point, you can also use soapy water to detect the leak point. Detachable double flange loose joint design defects, if none of the above reasons exist, then there may be a design problem, the wastewater quality has volatility plus the design of the evacuation space is not enough, the secondary steam will bring out the material liquid and liquid foam, the phenomenon of running material.
When the wastewater containing zinc passes through the resin, the ions of the detachable double flange loose sleeve transfer joint and the zinc ions in the water are exchanged and the zinc ions are separated from the wastewater. It can be plated on the surface of the material, and zinc remains electrochemical in the wastewater and can be reduced to metal at the cathode under the action of direct current. This treatment method is more efficient so it can be processed in large quantities, which is more suitable for large chemical enterprises and can also recover heavy metals from the wastewater. The solute can be extracted and separated at different temperatures, and the heavy metal zinc can also be separated by evaporation, while the large amount of salt components in the wastewater containing zinc can be crystallized and put into other processes for further use. When the material is evaporated under vacuum during operation, it is further heated by the material with detachable double flange loose joint, and when the second effect steam is produced by the evaporation of one effect, it is sent to the latter effect for heating and concentration, so that the steam can be reused to achieve the purpose of reducing energy consumption.
The finished solution is led out from the separator and the finished material is discharged at the bottom of the detachable double flange loose sleeve force transfer joint. Removable double flange loose sleeve force transfer joint natural circulation state rate is not fast, generally in order to reduce fouling and crystal precipitation, heating tube is suitable for processing not easy to structure and less corrosive solution concentration.