What should I do if the corrugated compensator is leaking from welding?

What should I do if the corrugated compensator is leaking from welding?
Leakage of corrugated compensator welding may be caused by wrong welding method or improper material selection. In order to avoid this situation, the following measures can be taken:
 
1 . Choose the right welding tools and materials. Using high quality welding tools and materials can help ensure the quality of welding.
2 . Make sure the welding position is correct. Correct welding position is the key to weld leakage of corrugated compensator. If the welding position is not correct, it may lead to problems such as current overload, overheating and water leakage.
3 . Correct welding method. Choosing the right welding method is very important. For some more complex corrugated compensator welding, you need to use a special welding method.
4 . Perform complete inspection and maintenance. Corrugated compensator welding leakage may be caused by some potential defects. Before welding, complete inspection and maintenance is needed to ensure the quality of the welding.
 
The solution of corrugated compensator welding leakage problem requires comprehensive efforts and careful management. With proper welding methods, selection of the right welding tools and materials, correct welding positions and complete inspection and maintenance, this can be avoided and the performance and life of the corrugated compensator can be ensured to be maximized.