How to effectively avoid blistering of rubber joints

How to effectively avoid blistering of rubber joints
Rubber joint is an important pipeline connector, which is used to provide airtightness and waterproofness at the pipeline connection, and also allows water to pass through. However, as rubber joints are affected by various factors during the manufacturing and use process, blistering inevitably occurs.
 
In order to avoid blistering of rubber joints, the following measures can be taken:
 
1 . Choose high quality rubber joints Choosing high quality rubber joints can reduce the possibility of blistering. When buying rubber heads, you can choose rubber joints with more waves or more zigzags, which can increase the friction on the surface of rubber joints and thus reduce the possibility of blistering.
2 . When installing rubber joints, you should pay attention to the choice of position and installation method. If the installation is not correct, then the friction on the surface of the rubber joint will be affected, thus the blistering phenomenon will easily appear. Therefore, when installing rubber joints, it is necessary to choose the correct position according to the direction and size of the pipe and install it in the correct way.
3 . Using the right working pressure is also an important factor to avoid blistering of rubber joints. If the working pressure of rubber joints is too high, the friction on the surface of rubber joints will be affected and thus blistering will easily occur. Therefore, when using rubber joints, it is necessary to choose the appropriate working pressure according to the bearing capacity of the pipeline and the requirements of use.
4 . Overstretching and compressing rubber joints may also lead to blistering. When manufacturing rubber joints, reasonable stretching and compression are needed according to the usage requirements. If the rubber joint is overstretched or compressed, then the friction on the surface of the rubber joint will be affected, and thus the blistering phenomenon will easily appear.
 
To sum up, avoiding the phenomenon of blistering of rubber joints requires starting from several aspects, including choosing high-quality rubber joints, reasonable installation, using appropriate working pressure and avoiding excessive stretching and compression. Only by combining these measures can the blistering of rubber joints be effectively avoided.