Full-rimmed rubber expansion joint features

Full-rimmed rubber expansion joint features
The characteristics and main features of rubber joints are not easy to rust and corrosion. Cast steel parts streamlined, compact structure rubber joint principle, physical properties better than casting flange. Can be based on a certain offset of the full screw connection made into a whole, easy to install. Explains the principle of expander rubber joint principle, it can bear the axial working pressure of pipeline. Then, the installation and protection can be completed and adjusted according to the specifications of the specific installation. In the work, not only can improve, efficiency, but also can maintain the pump . Gate valve and other pipeline machinery and equipment.
 
Full-sided rubber expansion joint features:
1, small size, light weight, good toughness, construction and installation is convenient.
2, after assembly can digest and absorb the transverse, radial and angular velocities generated by the pipeline vibration; flange is not equal, will not be endangered by the pipeline is not the same heart.
3、After installation, it can reduce the noise generated by the vibration of the pipeline pump, etc., and has strong vibration absorption level.
4、Inside seamless splicing Korakor rubber joint in heat-resistant, corrosion-resistant, acid and alkali-resistant pipeline, it is easier to avoid the erosion of corrosive substances inside the cavity and prolong its service life.
 
Full-sided rubber expansion joint limit switch is a kind of maintenance rubber flexible joint from pulling off risky device, the winding resistance offset manipulated within a certain range, to ensure the efficient operation of winding resistance pipeline. Anti-pull-off limit equipment to be enhanced on the premise of the original product selling point of a limit switch. The pipeline can also expand and contract type in the agreed expansion volume. Once its large expansion volume is limited, it can ensure the operation of the pipeline. It is especially suitable for pipelines containing vibrations or a certain inclination and bending connections. If the pipe bore diameter exceeds DN 200, a limit switch is required. The main reason is that the more apertures the pipe has, the more pronounced the toughness of the ball. Similarly, if it is a large diameter pipeline, it is also necessary to install limit switches. The main reason is that the rubber joint hanging in the air cannot unload the working pressure through the town pier, so it can only rely on the assembly of limit switches to operate.