-
Transverse large tie rod bellows compensator performance characteristics.
The compensator is composed of receiver, two bellows and large tie rod and other parts. It can absorb the transverse displacement in any plane of the pipe system. The displacement spherical nut rotates around the spherical washer, while the tie rod also h
-
Installation principle of C2F dismantling joint
If the position of C2F dismantling joint has been set, all the bolts of the joint shall be removed and the joint shall be put into the reserved position for reinstallation.
Take off the nuts at both ends of the flange and connect one end of the C2F disma -
How to install waterproof casing through the wall?
Expansion hole long wall for the plane, pre-buried waterproof casing in the construction of the plate mold clamping contact surface is large, not easy to dislocation; steel plate additional installation holes connected with the reinforcement, fixed firmly
-
The failure of the corrugated compensator and the solution
The emergence of the corrugated compensator is undoubtedly a breakthrough of the thermal pipeline compensator products. It not only opens up a new field for the production of the compensator, but also solves the fatal weakness of the working medium thrust
-
Luoying tells you the causes of aging of rubber expansion joints and preventive measures.
1.An important reason affecting the use of rubber joints is the oxidation by pressure and air during use. In the process of processing, storage and use of rubber and its products, the physical and chemical properties and mechanical properties of rubber gr
-
What must be paid attention to when installing the spherical compensator?
After installation on the pipeline, the sphere can rotate freely in eight angular ranges in a rotary motion to compensate for the deflection of the pipeline caused by foundation settlement, thermal expansion and contraction. It has the advantages of larg
-
Metal hose in the application process how to prevent overflow media?
In the heat pipeline, fire hose and sewage pipeline has been widely used, that is, the pipeline field of use more, then will inevitably occur in the pipeline blockage problem. The following ring crowd to analyze how to prevent the overflow of media.
-
Knowledge about pipeline limit expansion joint.
Limit expansion joint is to tighten and connect the bolt that comes with itself. This kind of expansion joint is convenient in construction, easy to install and designed, and now the construction is on the top of the house or roof, with the expansion join
-
How to extend the service life of stainless steel metal hose?
Metal bellows can be compressed or stretched, but if not installed in accordance with the correct location, it will quickly break and reduce the service life. Then we should how to better extend the service life of metal hose?
-
Fatigue testing of non-metallic compensators.
The non-metallic compensator also needs to meet the strength condition in the design, that is, its large stress does not exceed the permissible stress under the given conditions. The allowable stress can be derived from the limit stress divided by the coe
-
Corrugated compensator installation and test pressure precautions.
Corrugated compensator all movable components shall not be external components jammed or restrict the normal action of its movable parts.
Installation process -
The reason why the seal of the corrugated compensator has gained popularity is shared.
Corrugated compensator in the process of use, ordinary mechanical seal often because of device fluctuations or operating processes and other reasons caused by p
