-
Why Goes Wrong When Install the Rubber Joint
When construct the flexible rubber joint,it is necessary to make it in the natural state, and do not cause the deformation out of the product.
1,when the pipeli -
Good Performance YZT Rubber Vibration Insulator
Product performance: 1,YZT Rubber Vibration Insulator can effectively carry at all levels of load and deformation, bearing a wide range of especially suitable
-
Where Should Rubber Joint be Installed in the Pipeline
Where Should Rubber Joint be Installed in the Pipeline
-
PTFE - Polytetrafluoroethene Material
PTFE is called "plastic king", having the characteristic of excellent chemical stability, corrosion resistance,And It is one of the best corrosion-resistant materials in the world today, no toxic to people.
-
ZTH type rubber vibration insulator
ZTH series anti shearing shock absorber use multi curve cylindrical spring，the shrinkage rate is much larger than rubber materials therefore, the rubber vibratio
-
Features of CR of Thread Rubber Expansion Joint
Features of CR of Thread Rubber Expansion Joint
-
Scope of The Embedded Duckbill Valve
Application of range:
1,applicable to the sewage system
embedded duckbill valve can prevent flood and water intrusion into the sewer and the basement, to avoid -
Square Compensator Problems Need Attention during Installation
Square compensator is made after the completion of the center line size should meet the standard series listed size requirements. The bend tube wall surface can
-
Why the Oil Resistance Rubber Expansion Joint Also Can be Cracking
About the oil resistance rubber expansion joint,casing cracking,main because:First:the strength of the rubber expansion joint link parts is lower,so if it is gl
-
The Certainty of Rubber Joint Module to Replace the Hard Mode
Rubber joint development up to now this stage is quite perfect and mature; especially on the production process of change makes the use of rubber joint surface
-
Flange Choosing of Rubber Expansion Joint
Rubber joint is made of inside and outside layer of glue, ply and a steel wire ring which composed of tubular rubber parts, after vulcanization molding combine
-
Installation and Use Requirements for Metal Bellows Compensator
1. Before installing compensator, should check its type, specification and pipeline configuration, which must comply with the design requirements.
2. It is fo
