Flange rubber soft connection structure is simple, assembly noise reduction convenient

The flange rubber flexible joint is made of flame retardant fiber, which is the main material of the act, and there is no transmission. It can simplify the design scheme, prevent the use of large rubber bearing, and save a lot of raw materials and work. Polyphenylene sulfide has excellent heat resistance and corrosion resistance, silicone material has good heat resistance and corrosion resistance. There is a relatively perfect production and manufacturing installation, non can ensure no leakage. Simple construction, easy assembly and noise reduction.
Clear the inner and outer surface layer of the pipe joint head and the inner hole, and clear the length to exceed the length of the inserted pipe. Hydraulic steel pipe to drill the whole, good application of special type non-pipe cutter solution. The outer surface layer of the pipe connector should be shaved off a very thin layer with common tools to ensure that the aging layer and environmental pollution layer on the outer surface of the connector is completely removed.
If the pipe connector cannot be connected immediately after drilling, it should be sealed with plastic film to prevent secondary contamination. If the joint is left for a long time, it is proposed to make the joint again when the connection is announced. Considering that the wall thickness is thinned by drilling, it is better to remove the original drilled connector when making the connector again. The tube is generally sealed in the bag and should be opened again before application. The inner surface of the tube should also be scrubbed with the same cleaning toilet paper before application after disassembly.