Tips for using Reducing Rubber Joints

Reducing the radial coaxiality of the pipeline cannot be ensured due to ground collapse and some force majeure factors in the construction process, and the modification in the pipeline system software can prevent the radial pushing force of the pipeline from narrowing or pulling the pipe radial coaxiality, preventing the pipeline from leaking and cracking because it reduces the internal stress. For the destruction to ensure the smoothness of the pipeline, and the reducer rubber soft joint has the efficacy of compensation for the radial movement of the pipeline, adjust the upper side of the subject activity nut, you can adjust the length of the middle of the waterproof casing body so as to achieve compensation efficacy, in the lifting final installation first reduce the length of the reducer rubber soft joint, convenient lifting lifting, to arrive at the part after the length of the extension, you can easily assemble the joint fixed immobile sides, in the installation Modified in a reasonable maintenance will not be destroyed by the radial working pressure of the pipeline itself, to ensure that the installation, demolition, maintenance of the convenient development.
Reducing the working pressure pushing force (blind force) and compensating the installation deviation of the coupled parts can reduce the radial offset without digestion and absorption. The force transfer joint is suitable for the coupling of pumps, and other accessories. Reducing rubber joint and pipe clamp flange, force transfer screw and other components, it can transmit the working pressure push force (blind force) and compensation deviation of the jointed parts, can not digest and absorb radial offset. The coupling of such accessories. Used to sea, talk about water, cold water hot water, domestic water,, oil, gas, diesel oil, lubricating oil, wholesale refined oil, gas, natural gas, temperature not higher than 205 ℃ of steam, hot vapor and other substances used in the scope of the permissible offset digestion absorption radial offset and bear force push force pipeline connection of the equipment. Reducing rubber soft joint key with each other demolition, especially the large diameter installation and demolition has a very convenient installation and demolition maintenance efficacy, you can tighten the foot bolt to make every effort to collect, so that the spacing between the pipeline increased, the length of the adjustment after lifting and lifting, tighten the foot bolt fixed immobile. In the operation link in the reducer rubber soft joint for there is a good guarantee efficacy, especially the long-distance pipeline occurs when the adjustment and downward shift are able to digest and absorb compensation for this offset, so that the flange connection of the pipeline is not prone to leakage. Nominal diameter through pulse: DN65mm-DN3200mm pressure: 0.6-4.0MPa application substances: water, wastewater sealing raw materials: NBR flange connection specification.