What is the role of stainless steel metal hose and material characteristics

Joints at both ends of the metal pipe: Joints mainly include threaded connections. Flange connection. Quick coupling connection. The three main functions of the metal hose: reduce the stress of the pipeline installation, compensate for the movement of the rated position of the pipeline, and absorb the vibration of the pipeline system.
Stainless steel mesh cover is the main pressure-bearing part of the metal braided hose installed in the pressure pipeline, while protecting the metal hose. Depending on the pressure in the pipeline and the application site, one or more layers of stainless steel wire or steel belt can be selected and woven by certain parameters to form a high pressure resistant metal hose. There are two main types of stainless steel mesh jacket: steel wire mesh jacket and steel mesh jacket.
Characteristics of corrugated metal hose.
Recommended maximum allowable expansion per wave: full height type △α=±24mm half height type △α=±12mm.
Ash blocking plate: For the duct or less dusty ducts may not be used, for dusty flue should use ash blocking plate.
In order to reduce the number of wave sections of the corrugated pipe, cold drawing 50% should be considered.
Standard half-height corrugated metal hose is suitable for smoke duct shape size with cross-sectional area less than 4.6 square meters, where one side is less than 1.5m but more than 0.6mm occasion. Standard full height corrugated metal hose is suitable for all smoke and air ducts.
Corrugated metal hose has good flexibility. Fatigue resistance. High pressure resistance. High and low temperature resistance. Compared with other hoses, corrosion resistance and many other characteristics (rubber). The service life of plastic hose is much higher, so the overall economic benefits are higher. With the development of modern industry, you have an increasing demand for high temperature and high pressure resistant corrugated hose.
Hose range of application: conveying pipe needs to be fully flexible to prevent vibration at the piping, piping for steam. . Gas . Air . Heavy oil . Petroleum. Applicable to chemical class, etc.
In recent years, with the continuous development of metal hose, metal hose in the application of accidents and failures, high temperature resistance in all walks of life. The demand for high pressure corrugated metal hose is growing. At the same time, the failure of metal hose accidents are also increasing, hose failure leads to accidents. . Huge losses in environmental pollution and economic aspects.
Stainless steel metal hose pitch flexible; according to the objective factors of different environments, can be adjusted at will very good flexibility, so that its application areas are very wide, widely used in modern industrial fields, wire and cable protection tube and civilian shower hose and other automation instrumentation signal, its specifications for 3mm to 150mm ranging. Some of these smaller caliber stainless steel briefly described hose in the protection of precision optical sensing route is used back.