Advantages of high pressure resistant universal bellows expansion joint

Advantages of high pressure resistant universal bellows expansion joint
The advantages of high-pressure universal bellows expansion joint compensation distance, pressure loss is small. Generally can be designed according to 200-5000. a group of compensator, can be arranged in any straight line position between the two fixed points of the pipeline; due to the relatively small number of compensators, the expansion joint itself does not produce pressure drop, steam transmission pressure drop is relatively small, axial bellows compensation square .02-0.03MPa / km, which is particularly important in the realization of remote heating. an full performance High, long service life. Matters to be noted during installation
1 . The installation needs to be set up for temporary fixing, and wait until the end of the installation and fixing, fixed removal.
2 . Ensure the correct installation direction in the installation of the metal compensator, the compensator has a weld end, should be installed against the horizontal pipe media flow direction, and the pipe and the corrugated compensator should be concentric, not skewed.
3 . Absolutely can not use the compensator deformation to install the pipeline installation deviation adjustment, to ensure that both ends of the compensator care about coaxial error to achieve the minimum, so as to ensure its normal operation, service life is also guaranteed.
4 . Axial type complex tie rod corrugated compensator external components can not be stuck in the pipeline compensator above the original activity, can not limit its normal activities
5 . If there is condensate in the pipeline, then you need to install the drainage gate below the wave section