Five key points for using double flange force transfer joints

Five key points for using double flange force transfer joints
There are some tips that you need to know about using double flange force transfer joints, so we should pay attention to the following five aspects when choosing force transfer joints in any case:
 
1 . Transfer joints must clearly understand the specification parameters of each part of them, whether in use or when they need to be installed.
2 . Understand and understand the direction of the medium of the force transfer joint, and also note that the inner casing sleeve of the force transfer joint must be consistent with the flow direction of the medium.
3 . The deformation components that need to be used during the installation of the force transfer joint should be cancelled after the installation is completed.
4 . In order not to reduce the service life of the force transfer joint, the phenomenon that the force transfer can be deformed shall not be used to adjust the tolerance.
5 . Pay attention to the protection of the safety issues of each link of the transmission joint and do not make it affected during installation. Double flange transmission joint is applicable to the connection method with flanges on both sides, adjust the installation length of both ends of the product and the pipe or flange. After the installation and welding is completed, the gland bolts are tightened evenly diagonally to make it a whole with a certain displacement, which is convenient for installation and maintenance and can be adjusted according to the size of the site. When working, axial thrust can be transferred to the whole pipeline, so that the pressure diffusion disappears. The role of transmission joints is closely related to installation. Introduction to the installation of transmission joints on pipelines: When installing pipelines, pre-bury and calculate the size in advance. When connecting transmission joints to other equipment, find the right position for alignment and fix it with bolts, or use welding and other methods. After the connection is completed, the overall size is adjusted and the installation is finished.
Although it is convenient to install the transmission joint on the pipeline, if the overall size is not adjusted properly, it will affect the normal work of the transmission joint and cause the pipeline to malfunction. So be careful when installing. As long as there is no problem with the installation, double flange force transfer joints will not malfunction in future use.