Use characteristics of metal compensators.

LuoYing's metal compensator has many kinds, carbon steel, and stainless steel, but also steel lined with plastic, etc., mainly according to the different use of different environments to choose different materials, are available according to the customer's technical conditions made.
 
Large diameter metal compensator contains the left frame, right frame and shaped ring. The right side of the left frame and the left side of the right frame are equipped with outward flanges, and the two sides of the shaped ring are each connected with flanges; the left window frame is equipped with stepped wave conduit, whose large end is connected with the left window frame metal compensator and metal hose, and the small end is placed in the middle of the upper and lower window frames. The right window frame is lined with a tube, one end is connected to one end of the right window frame, the other end is placed in the middle of the upper and lower window frame; the small end of the guiding tube is lower than the diameter of the lined tube, part of the lined tube. The metal compensator design scheme, easy to construct, easy to use, can clear sufficient tangential offset under the condition of no lifting size. At the same time, the application of the metal compensator certainly downward deviation, just plug the gap to avoid the dust into, increase the use of machinery and equipment term.
 
High temperature resistant metal compensator contains flange and drum skin. Flange and drum skin of the two sides of the fixed immobile coupling metal compensator and metal hose, resulting in compensation structure; top rotation produces tangential flange edge, placed in the inner hole of the flange; flange inner face with ring plate, ring plate according to the bolt and the inner hole of the flange fixed immobile coupling, drum skin tangential fixed immobile. The blue edge is fixedly connected to the mouth of the inner hole of the flange; furthermore: the gap between the ring plate and the inner hole of the flange is filled with sealant to produce a mouth perimeter sealing structure. The drum skin is a double-layer composite structure; the mesh panel is used for single-sided or double-layer metal wire mesh products.