What are the five common causes of metal hose leakage?

1、Seal ring damage
The lever rotates the drive shaft, when the faucet is opened, the gasket is pulled up from under the high-pressure gate valve, the water is discharged under the action of the working pressure, twist the faucet, the drive shaft gasket returns to the high-pressure gate valve, the water is not easy according to. If water seepage is produced, the most common factor may be the seal ring in the long application of the whole process of damage or aging, can not produce a better shut-off situation with the high-pressure gate valve. Even if the faucet is turned off, the water will gradually seep out, resulting in the generation of water seepage.
2、Loose filling material screw cap
There is a sealing nut on the valve core. When loosened, it will cause the valve core to loosen, not sealing water, causing water seepage. When you open the faucet, water will overflow from the door handle, it is likely to reduce the use of the faucet period.
3, seal ring destruction
There is also a sealing ring, consisting of one or several round rubber rings (or items similar to rope or wire) coiled around the valve heart under the sealing screw cap, which helps to ensure the excellent sealing practical effect of the tap. The effect is very good.
If the sealing ring is aging and destroyed, it can also lead to water seepage. When the water flows through the faucet, the water will be discharged from the bottom.
4, do the industry destroyed faucet high-pressure gate valve is also likely to cause problems. The ruined gasket will not produce a better seal, but also may cause the faucet's high-pressure gate valve is damaged by the metal material valve core.
Or in the long application of the whole process will accumulate some fine sand and other fine particles, so that the gasket can not be with the high-pressure gate valve sufficient card tight, it will occur seepage conditions.
5, power supply plastic hose installation unreasonable
Tap water will seep. In addition to the faucet's own problems, it is also possible that the power supply plastic hose and faucet itself is not connected to cause.
In addition, if the faucet power supply water supply plastic hose aging, or unstable pressure, or by leaching, will also lead to water seepage problems.