What must be paid attention to when installing the spherical compensator?

Spherical compensator is a device to solve the thermal expansion and contraction of the pipeline, can be widely used in metallurgy, petroleum, chemical industry, electric power, light industry, textile, construction, etc., mainly for the ground settlement, vibration, complex terrain pipeline connection. After installation on the pipeline, the sphere can rotate freely in eight angular ranges in a rotary motion to compensate for the deflection of the pipeline caused by foundation settlement, thermal expansion and contraction. It has the advantages of large compensation volume, small space occupation, small fluid resistance, easy installation and low comprehensive cost.
 
Straight pipe section can give full play to the characteristics of the spherical compensator compensation capacity is large. According to the pipe specifications and pipe rigidity, the distance between the fixed supports at both ends of the pipe can be set at 30m~70m, and a set of spherical compensator can be installed horizontally or vertically.
 
Because of this type its fold angle value doubled, can shorten the ball center distance, give full play to the spherical compensator compensation capacity. This type is suitable for the spherical compensator is located at both ends of the two fixed brackets, close to the two fixed brackets.
 
Bidirectional installation applies to the spherical compensator is located at both ends of the two fixed points, more moderate position, try to make the length of the A section of the pipeline and the length of the B section of the pipeline is close to or distance. This installation method is suitable for long distance straight pipeline, can be installed horizontally, also can be installed vertically.