The thicker the wall of stainless steel waterproof casing, the better?

Traditional flexible waterproof casing products have the water stop ring set in the middle. Some need to be set near the -section 10cm, some need to lengthen the thicker wall, increase the wing ring according to the actual expansion, and determine the width of the wing ring according to the product standard. The water stop ring in the middle of the flexible waterproof casing is unavoidable in the welding process. The stop ring is used together with the waterproof casing. It is usually welded to the waterproof casing and can not only be used alone, but also effectively prevent water leakage. It is also a material.
 
According to the production standard, there are three standards for waterproof casing: 6kg, 10kg and 16kg. Likewise, we can set the production standards according to the different needs of our customers. Since the operation of the pipeline basically does not produce vibration and the pressure generated by the medium does not affect the product, we can use near standard or common standard to give full play to the performance of the product and avoid wasting resources. Then, the wing ring in the middle of the waterproof casing is composed of steel, pipe hoop, water stop and water stop ring. Due to the good elasticity of rubber, the upper part of the pipe hoop is reinforced. When the temperature difference is large, the water stop ring remains closely attached to the pipe wall and is combined with the waterproofing layer during installation. It used to be made of steel, but is rarely used now. These can then be used to waterproof toilets and other areas of floor piping if the customer is shown in the middle of the construction site. It comes in a variety of types, forms and materials.