JGD rubber soft joints in the pump industry

In recent years, with the rapid development of industrial production and science and technology, rubber joints are widely used in industrial production, chemical plants, pipelines and other fields. When selecting the type, the flange specification of pump, pipeline, rubber joint and gate valve should be consistent. If the riser or empty frame is applied, the rubber joint does not bear weight and should be fixed using support frame, town pier, etc. Rubber joints should be installed after the control valve. All subject moving parts of rubber joints should not be stuck or restricted by external prefabricated parts, and all normal postures of subject moving positions should be ensured. When ordering, you should specify: specification type, working pressure, temperature, general material, flange specification, installation length, etc. The rubber joint adopts the upper use structure, which reduces the grounding bolt of the oil circuit board itself, improves the stability of the gate valve, and overcomes the danger of the weight of the system software itself to all normal operation of the gate valve. Widely used in energy chemical industry, petrochemical equipment, plastics, paper industry, pharmaceutical industry and other pipelines to separate waste or flow into the conversion equipment.
Water conservancy project is a huge and long-term engineering project with relatively high specification. In water conservancy projects, rubber joints and rubber connectors play a vital role. Rubber joints have good elasticity and strong coordination ability. Therefore, they can usually be realized under very high regulations for joints. Rubber joints have the characteristics of good connection, not only have the effect of connection, but also have the effect of protecting the pipeline when connecting between the pipeline and the pipe.
 
Rubber joints are applied to the connection of accessories such as pumps, gates and valves. Rubber joints are composed of prefabricated components such as rubber joints, pipe clamp flanges and force transmission extruder screws. It can transfer working pressure drive (blind force), compensate pipeline deviation, and cannot absorb radial deviation. It is mainly used to connect pumps, gate valves, pipelines and other accessories. The rubber joint consists of key components such as itself, seal ring, cover, expansion tube, etc. This product is suitable for adjusting the assembly length of pipeline connected with flange on both sides of the product. The top angle symmetrically tightens the foot bolt of the valve cover applied to the product with a certain deviation. Easy to install and maintain. When installing and maintaining, it should be adjusted according to the site specifications. When operating, the counter-radial driving force can be transmitted to all pipelines.