What are the wide range of uses of EPDM rubber rubber soft joints?

Rubber joints can provide great convenience for the installation and disassembly of urban drinking water towers, pump houses, intelligent water meters and gate valves, and make up for the stability problems caused by temperature differences in long-distance pipelines, replacing U-tubes. Rubber joint products can be used at the level of water supply and drainage projects, for engineering level, with a general temperature of 250°C and a working pressure of 1.6 MPa. Meanwhile, unique series of products with main parameters can be produced and manufactured according to users' requirements to meet the needs of industries such as liquefied gas, crude oil, chemical plants, water and electricity projects. Its connection methods are: single disc, insert disc type; connection specifications according to the current standard national industry standards, foot bolts can be positioned according to customer requirements plus anti-stretch off. Due to the excellent comprehensive performance of rubber joints, they are widely used in chemical plants, engineering construction, water supply and drainage, drainage pipes, crude oil, heavy industry, refrigeration, environmental sanitation, plumbing installation, fire safety, electric power engineering and other basic projects.
Rubber joint is a device to connect pipes consisting of sealing ring and fastening prefabricated components. It is mainly used to digest and absorb the offset and cannot bear the force pushing force of the compensation connector. Principle: After the rubber joint is installed in the pipe, tighten the nut seal ring and tilt each other under the action of the nut cover to compress the sealing and connecting effect on the outside of the pipe.
1. the raw material of rubber joint and disc is 20; the material of bolt is 35; the raw material of screw of brake system is 2cr13. the raw material of silicone ring: raw material oil nitrile rubber I-2, water neoprene II-2.
2. In addition to the raw material oil, other available pipeline rubber joint parts should pay attention to the solution of zinc.
3. in general, the installation size is L1. according to the purpose of the connector application, the L1 scale value can be adjusted, but not more than 1.5L1.