-
What are the characteristics and production process of hinged corrugated compensator
The hinged corrugated compensator can be passivated with oxidizing agents, forming a layer of tough and fine chromium-rich oxide maintenance film Dr2O3 on the e
-
What are the main properties of the bend pressure-balanced corrugated compensator?
The general choice of three-electrode torch argon arc welding, bend pressure balance corrugated compensator wall thickness S ≥ 2mm, welding speed than a sing
-
JDX NBR bendable rubber joint storage advice
The width of JDX NBR bendable rubber joint becomes narrower and the arc pit becomes longer, narrower and deeper. the residual height of JDX NBR bendable rubber
-
Do rubber expansion joints under DN300 need to be fixed with fixed brackets?
In DN300 or below, the pipeline already has a fixed bracket on the premise, to be able to not need to install anti-pull off equipment. In DN300 rubber expansion
-
About the application of bellows expansion joints in heating engineering
As a compensation element with good compensation performance and easy maintenance, bellows expansion joints have been more and more widely used in domestic and
-
What are the main structural materials of flexural rubber joints?
The flange flexural rubber joint is strictly over-shifted and installed during the installation process. The actual axial displacement pressure of the rubber jo
-
Rubber Gaskets Details
Rubber gasket has the characteristics of high temperature resistance, low temperature resistance, ozone resistance, aging resistance, corrosion resistance, oil
-
Once the equipment of rubber shock absorber is running, the noise is greatly reduced.
Rubber shock absorber stability can be greatly improved, easy to install, able to all kinds of horizontal, vertical pumps, fans, air conditioning units, generat
-
Can rubber shock absorbers withstand large loads for a long time?
Rubber shock absorber has high elasticity and viscoelasticity, and its area is equal to the vibration energy, equipment and other equipment converted into heat
-
Rubber vibration dampers are made of different materials depending on the conditions of use
Rubber vibration isolators are widely used according to different conditions of use because they make use of the following characteristics of rubber: high elast
-
Rubber shock absorber for the foundation of machinery vibration damping noise
Rubber shock absorber is suitable for the foundation vibration damping noise of power machinery such as pumps, compressors, blowers, freezers, compressors, etc.
-
Flexible rubber expansion joint testing
A commodity in the factory usually must be many testing processes, all the circumstances to meet the standards before stepping into the hands of customers, test
