-
What is the production standard of metal rectangular corrugated expansion joint
Full name rectangular rounded corrugated metal expansion joint, is one of the supporting equipment for power station flue gas pipeline. Rectangular rounded corr
-
Casing pipe expansion joint installation FAQ
As refractory material for centerless induction furnace, it should have very good thermal shock stability and resistance to crack expansion. Obviously, it is no
-
What factors should be considered for thermal expanders?
When the medium contains active anions (common as thermal expanders), the balance is damaged and dissolution prevails. The reason is that the thermal stretchers
-
What are the main uses of low-temperature rubber flexible connections?
Low-temperature rubber flexible connection is viewed and the exterior flaws are removed, cut into the required length, centered on the end of the perforated en
-
The main performance of bellows mechanical seal failure
Bellows mechanical seal has the advantages of good sealing performance, high reliability, long life, good stability and good vibration resistance than other sea
-
Design requirements for bellows compensators in steam pipelines
The bellows compensator meets the design requirements. For the compensator with inner sleeve, care should be taken to make the direction of the inner sleeve con
-
What are the installation requirements for KXT PTFE-lined bendable rubber joints
What are the installation requirements for KXT PTFE-lined bendable rubber joints
Ion stacking oxide or oxide method, is to put KXT lined tetrafluoro bendable ru -
KXT nitrile rubber bendable rubber joint actual operation
KXT buna NBR bendable rubber joints made with relatively low average molecular weight have a better oleophobic appearance, which is more conducive to demoulding
-
What is the basis for the selection of the grooved wear-resistant rubber joint?
In all welding applications of grooved wear-resistant rubber joints, the edges of the grooved wear-resistant rubber joints are melted, and when the clamping bra
-
Buckle slot EPDM EPDM rubber flexible connection production process
Generally speaking, the grooved EPDM EPDM rubber joint will try to reduce this error as much as possible, but in practice, it is very difficult to reach an erro
-
Reasons for non-smooth surface of plate-and-box type corrugated compensator
The plate-and-box corrugated compensator is planned for deep-sea, high-temperature, high-pressure use. Its higher strength means that it can have thinner walls,
-
Transverse rod corrugated compensator different material characteristics
On the acceptance of fluid pressure of the transverse rod corrugated compensator are to carry out hydraulic pressure test to check its pressure resistance and q
