SSLW Strainer Retractor

Filter Expansion Joint, the lastest design for double uses, is the new coming pipeline facility with its compact structure, small size and light weight.1×1-50-600 horizontal screw-wing water meter without filter mesh,  can block the water with the impurities (such as sand, water grass or block). Thus, it is needed to equip the pipes with the water-filtering tanks. But, owing to its big bore and connection with flanges, expansion joint is in need for easy water meter installation and maintenance.

View More

RS Flexible Tube Retractor

Flexible sleeve expansion joint provides great convenience for water supply pipeline,water tower,water pump,water meter and valve to install and detach.It also can compensate the expansion or contraction caused by temperature change.

View More

CS Heat pipe expanders

Thermodynamic compensator is mainly applied axial compensation, also has superior bending capacity, so I do not take into account the impact of sink pipes. Buried corrugated sleeve of compensation under the protection of housing and orientation compensation for the realization of freedom stretching, and other properties the same as ordinary bellows.

View More

Large Flexible Dismantling Joint

Large Flexible Dismantling Joint is a new type of pipe connector researched and developed based on the facts of the development of our country and absorption of foreign advanced technology.The main structures are mde of short pipe flange,gland,sliding tub

View More

BY(SSJB-3) gland type loose end limit expansion joint

Covering Limited Telescopic Dismantling Joint is improved by adding the limited device on the basis of loose flexible rubber joint. Fit it with double nut at the maximum compensation volume, the product functions as limiting the position of rubber joint. It secures the safe operation of the pipe efficiently; especially applies to the pipeline which vibrates fiercely, be with somewhat deflection, or is on the corner.

View More

VSSJA-2 (B2F) Double Flange Limit Expansion Joint

Double Flange Dresser Coupling supplier is used to connect  both ends  with flange, when installation, adjust product both ends connection length, opposite angle evenly tighten the gland bolts, then adjust limited nut, so the pipe can expand freely within the expansion range, locking the expansion amount, the safe operation of pipe.

View More

(VSSJAFG(C2F))Double flange force transfer joint Seller

Dismantling Joints Seller is designed to be the final closing piece in the pipe network,to ease the assembling and disassembling for later maintenance of a pump or valve.A standard adjusting range of 50mm on length and a small lateral and angular

View More

Single Flange Dismantling Joints

Single flange transmission joint is used to connect Flange on the one side and weld pipe on the other，modulate the product＇s length in between.Screw down bolts after installation to integrate the structure and guarantee a ceitain shift which will facilit

View More

VSSJA-1(BF)-type single flange limit expansion joint

Single Flange Dresser Coupling is formed by adding a limit device to the basic sleeve Type Expansion Joint and locked at maximum expansion by double nut.The pipeline can thus freely expand in certain limit. When maximum valve is reached,it will be limited

View More