Isolateur de vibrations à câble métallique type GSG

GSG series stainless steel wire rope vibration isolator is a new vibration isolator redesigned and developed on the basis of GS series vibration isolator, its positive and lateral bearing capacity is basically close, the lateral is 70% of the positive bearing capacity, the supporting structure of the wire rope are arched, therefore, the stability is stronger and the vibration isolation effect is more significant.

View More

Isolateur de vibrations à câble métallique type CR

The product has the comprehensive function and effect of vibration isolation and buffering, and the design structure is compact and simple.

View More

Support suspendu type V / Amortisseur suspendu

In suspension shock absorber simplest form, shock absorbers are hydraulic (oil) pump like devices that help to control the impact and rebound movement of vehicle's(or other equipment) springs and suspension. Along with smoothening out bumps and vibrations, the key role of the shock absorber is to ensure that the equipment's tyres remain in contact with the road surface at all times, which ensures the safest control and braking response from your equipment.

View More

Isolateur de vibrations à ressort réglable type JA

Type JA vibration isolators consist of individual, large diameter, laterally stable steel springs assembled into welded steel housing assemblies to limit vertical movement of isolated equipment when equipment loads are reduced or when equipment is subjected to large vertical external forces. The housing also provides a constant free and operating height to facilitate installation.

View More

Isolateur de vibrations à ressort amortisseur type JB

JB Series Spring-Flex Isolators are cast aluminum-housed, adjustable spring isolators with telescoping top and bottom sections separated by resilient elastomeric inserts to limit horizontal motion. A non-skid elastomeric pad is bonded to the base plate, eliminating the need for bolting. They are available in four mounting styles; style CAL-E (positioning bolt and nut), CAL-H (flat top plate), CAL-P (positioning pin), CAL-T (non-skid, ribbed elastomeric pads bonded to the top).

View More

Isolateur de vibrations à ressort type JC

Springs have corrosion resistance epoxy powder coated finish, rated to withstand 1000 hours of salt spray testing as per test method ASTM B117.Springs have a deflection of 25mm at rated load and are designed with 50% overload capacity, to compensate for unexpected load variations and to reduce operating stress.The steel reinforced molded elastomeric load cup with 8-10mm thick ribbed base act as noise breaks for high frequencies in the audible range.

View More

Isolateur de vibrations à câble métallique type GS

The maximum dynamic displacement is over 70 percent of the space the mount takes up, the dynamic stiffness decreases when the displacement increases. Heavy duty wire rope isolators can be installed in many different ways and are a very versatile wire rope isolator. These mounts also provide elastic support for heavy-duty equipment such as generators.

View More

Isolateurs à câble métallique type HVG

HVG wire rope isolators are special wire rope isolators that are small in size for applications in which space is limited. These wire rope isolators provide the same vibration and shock isolation capabilities as normal wire rope mounts just in a smaller size. Our compact wire rope mounts are made of high quality stainless steel braided cable threaded through aluminum alloy retaining bars, crimped and mounted for maximum shock and vibration isolation.

View More

Isolateur de vibrations à ressort amortisseur type JD

The difference between JD type spring vibration isolator and JC type is that the base area of the product has been doubled.

View More

Isolateur de vibrations à ressort combiné type JS

   JS type combined spring vibration isolator uses multiple combined springs as the main body, the upper and lower configuration of steel plates and non-slip rubber pads, the product makes full use of the integrated steel spring low frequency and rubber vibration isolation damping characteristics, can eliminate high-frequency vibration transmission, so as to achieve good vibration isolation and noise reduction effect.

View More

Isolateur de vibrations à ressort amortisseur type ZTA

ZTA type damping spring vibration isolator main features and uses: ZTG type damping spring vibration isolator is composed of spring, upper rubber sleeve, lower rubber pad, upper and lower iron parts, etc. The vibration isolator has the advantages of simple structure, small volume, good vibration isolation effect, easy installation, etc.

View More

Isolateur de vibrations à ressort suspendu type ZTY

ZTY type spring vibration isolator is used in fan coil and other small equipment vibration damping, in the installation of central air conditioning, fan coil vibration isolation installation can improve the operation of the wind plate to extend the service life.

View More